Mobile Shredding System for Scrap Metal
BRAVO 6280 Hammer Mill Shredder
6280 SHREDDER MODULE
OUTPUT PER MONTH: 1,500-3,000 Tons
OUTPUT PER HOUR: 15-20 tons/hr. in ferrous output capacity (13.7 m tons/hour)
YARDS: 10,000 – 30,000 tons/year
OUTPUT SCRAP DENSITY: 65-70 lbs./cubic ft.
OPERATING COST/TON: Less than $25 USD/ton
3TEK BRAVO 6280 MACHINE WARRANTY: 14 months/2,000 hours
CAT EXTENDED ENGINE WARRANTY: 5 year/6,000 hours Platinum Limited Warranty
BUYING SIMULATOR
Take a few moments to see if a Bravo Mobile Shredding System is a smart move for you and your business.
BRAVO 6280 MEDIA
BRAVO 6280 GALLERY
ASSEMBLED & OPERATING DATA
WEIGHT: 311,000 lbs. (141,067 kg)
LENGTH: 50’0” (15.2 m) edge of structure to end of takeaway conveyor
WIDTH: 14’0” (4.3 m)
HEIGHT: 24’0” (7.3 m) to top of erected feed chute
LOADING HEIGHT: 20’0” (6m)
CAT DIESEL MODEL/HP: CAT C32 Tier 4 certified @1125 HP
FUEL CONSUMPTION AT RATED OUTPUT: 35 gallons/hour (159 Liters/hr)
BRAVO 6280 MOBILE SHREDDER
GENERAL SHREDDER DETAILS
- Disk Rotor design: 4 pin with 9 disks
- Width side wall to side wall: 80” (2,032 mm)
- Shredder Wall thickness: 1.5” (38.1 mm)
- Wear Liner thickness: 3” (76.2 mm)
- Feed Chute: 9’7″ (2.9 m) long
- Integrated Infeed Conveyor: 19′ (5.9m) length x 6′ (1.8m) width
- Single Feed Roll: 42” (1,067 mm) diameter tip to tip with variable speed 6-10 RPM
- CAT C32 Tier 4 Certified by factory providing 1125 HP
ROTOR DETAILS
- Rotor Speed: 750 RPM
- Hammer Swing Diameter: 62” tip to tip (1,575 mm)
- Rotor Bearing and Lubrication: 10” (254 mm) bearings with oil bath lubrication and RTD (resistive temperature device) on each bearing for protection
- Hammer Pin Diameter: 3 7/8” (98 mm)
HAMMERS
- Hammer Weight: 240 lbs. (109 kg)
- Material: Cast Manganese
- Quantity: 8 is standard
OTHER SHREDDER CASTINGS: GRATES, ANVILS, ETC.
- Anvil: 3 Piece Bolt in design
- Reject Door: 24” (610 mm) tall. Designed for aggressive discharge of unshreddables
- Back Wall: 5.0” thick (127 mm) thick, reversible to increase available life
- Reject Door and Back Wall: Angled grate opening to improve discharge efficiency
FEED SYSTEM
INFEED CONVEYOR INTEGRATED
- 19′ (5.9m) length x 6′ (1.8m) width with interlaced steel belt
RAMP
- 9’7″ (2.9 m) long, loading height 20 feet (6 m); replaceable AR wear plates under feed roll. Side walls ½” (12.7 mm) thick.
SINGLE FEED ROLL SYSTEM
- Feed Roll Speed: 0-10 RPM
- Hydraulic Drive: One hydraulic motor driven by closed loop piston pump
FEED ROLL
- 36” (914 mm) drum diameter, 42” (1,067 mm) outer tooth diameter
- Construction: Using one inch (1″) (25.4 mm) thick rolled steel with 3” (76.2 mm) AR (Abrasion Resistant) teeth supported by heavy duty flange bearings
TRACK UNDERCARRIAGE MOUNT
- Size: 345 Class
SHREDDER TAKEAWAY CONVEYOR
- 48” (1,219 mm) wide by 24’ (6 m) long belt
PRODUCTION ENGINE
- Manufacturer: Caterpillar Tier 4 Certified by factory
- Model: C32, 32.1 Liter displacement
- Engine HP: 1125 HP @1750 RPM
- Engine Configuration: V-12 Cylinder, Four Stroke, Twin Turbocharged and Aftercooled
- Intake: Two (2) Donaldson dry type air filters with safety elements and pre-cleaners
- Cooling: HD folded core radiator
- Fuel Storage: 230 gallon (870 liter) tank complete with float switch
DRIVE TRAIN
- Integrated clutch
SYSTEM CONTROLS
- Industry standard Allen Bradley mobile control platform for shredder performance and diagnostic information
- Control system with remote master display has multicolored graphical module with easy to read display
- Fully functional automatic feed control system designed to maximize production by analyzing machine performance inputs from multiple sources
COMPACT PIN PULLER
- Included as standard
BRAVO 6280 Specification Sheet (PDF)
What Materials Can The Bravo 6280 Safely Process? (PDF)
Mobile Downstream Systems
RECON | MOBILE FERROUS SEPARATION SYSTEM
The Recon combines multiple separation technologies that together provide high capture rates and excellent cleanliness of ferrous scrap.
ECS 60 | MOBILE EDDY CURRENT SEPARATOR
The ECS60 is a mobile metal separation unit and the ideal partner to the Recon.
OPTIONAL EQUIPMENT
We offer a range of optional equipment for the Bravo 6280, including the Cold Weather Package and our Spare and Wear Parts Offering. For more information, please give us a call.
OTHER SHREDDERS
ALPHA 7400 ★ 2100
ALPHA 7400 ★ 2500E
CALL US
3TEK HEADQUARTERS
201 E Shady Grove Rd.
Grand Prairie, TX 75050
SUBSCRIBE TO OUR NEWSLETTER
Subscribe to stay informed about our products, services and new advancements.