BRAVO 6280

6280 SHREDDER MODULE

OUTPUT PER MONTH: 1,500-3,000 Tons
OUTPUT PER HOUR:
15-20 tons/hr. in ferrous output capacity (13.7 m tons/hour)
YARDS: 10,000 – 30,000 tons/year
OUTPUT SCRAP DENSITY: 65-70 lbs./cubic ft.
OPERATING COST/TON: Less than $25 USD/ton
3TEK BRAVO 6280 MACHINE WARRANTY: 14 months/2,000 hours
CAT EXTENDED ENGINE WARRANTY: 5 year/6,000 hours Platinum Limited Warranty

BRAVO 6280 PRODUCT VIDEO

BRAVO 6280 GALLERY

ASSEMBLED & OPERATING DATA

WEIGHT: 311,000 lbs. (141,067 kg)
LENGTH: 50’0” (15.2 m) edge of structure to end of takeaway conveyor
WIDTH: 14’0” (4.3 m)
HEIGHT: 24’0” (7.3 m) to top of erected feed chute

LOADING HEIGHT: 20’0” (6m)
CAT DIESEL MODEL/HP:
CAT C32 Tier 4 certified @1125 HP
FUEL CONSUMPTION AT RATED OUTPUT:
30 gallons/hour (114 liters/hour)
DEF FLUID CONSUMPTION AT RATED OUTPUT:
0.6 gal/hour (2.28 liters/hour)

BRAVO 6280 MOBILE SHREDDER

GENERAL SHREDDER DETAILS

  • Disk Rotor design: 4 pin with 9 disks
  • Width side wall to side wall: 80” (2,032 mm)
  • Shredder Wall thickness: 1.5” (38.1 mm)
  • Wear Liner thickness: 3” (76.2 mm)
  • Feed Chute: 9’7″ (2.9 m) long
  • Integrated Infeed Conveyor: 19′ (5.9m) length x 6′ (1.8m) width
  • Single Feed Roll: 42” (1,067 mm) diameter tip to tip with variable speed 6-10 RPM
  • CAT C32 Tier 4 Certified by factory providing 1125 HP

 

ROTOR DETAILS

  • Rotor Speed: 750 RPM
  • Hammer Swing Diameter: 62” tip to tip (1,575 mm)
  • Rotor Bearing and Lubrication: 10” (254 mm) bearings with oil bath lubrication and RTD (resistive temperature device) on each bearing for protection
  • Hammer Pin Diameter: 3 7/8” (98 mm)

 

HAMMERS

  • Hammer Weight: 240 lbs. (109 kg)
  • Material: Cast Manganese
  • Quantity: 8 is standard

 

OTHER SHREDDER CASTINGS: GRATES, ANVILS, ETC.

  • Anvil: 3 Piece Bolt in design
  • Reject Door: 24” (610 mm) tall. Designed for aggressive discharge of unshreddables
  • Back Wall: 5.0” thick (127 mm) thick, reversible to increase available life
  • Reject Door and Back Wall: Angled grate opening to improve discharge efficiency

 

FEED SYSTEM

INFEED CONVEYOR INTEGRATED

  • 19′ (5.9m) length x 6′ (1.8m) width with interlaced steel belt

RAMP

  • 9’7″ (2.9 m) long, loading height 20 feet (6 m); replaceable AR wear plates under feed roll. Side walls ½” (12.7 mm) thick.

SINGLE FEED ROLL SYSTEM

  • Feed Roll Speed: 0-10 RPM
  • Hydraulic Drive: One hydraulic motor driven by closed loop piston pump

FEED ROLL

  • 36” (914 mm) drum diameter, 42” (1,067 mm) outer tooth diameter
  • Construction: Using one inch (1″) (25.4 mm) thick rolled steel with 3” (76.2 mm) AR (Abrasion Resistant) teeth supported by heavy duty flange bearings

TRACK UNDERCARRIAGE MOUNT

  • Size: 345 Class

 

SHREDDER TAKEAWAY CONVEYOR

  • 48” (1,219 mm) wide by 24’ (6 m) long belt

 

PRODUCTION ENGINE

  • Manufacturer: Caterpillar Tier 4 Certified by factory
  • Model: C32, 32.1 Liter displacement
  • Engine HP: 1125 HP @1750 RPM
  • Engine Configuration: V-12 Cylinder, Four Stroke, Twin Turbocharged and Aftercooled
  • Intake: Two (2) Donaldson dry type air filters with safety elements and pre-cleaners
  • Cooling: HD folded core radiator
  • Fuel Storage: 230 gallon (870 liter) tank complete with float switch

 

DRIVE TRAIN

  • Integrated clutch

 

SYSTEM CONTROLS

  • Industry standard Allen Bradley mobile control platform for shredder performance and diagnostic information
  • Control system with remote master display has multicolored graphical module with easy to read display
  • Fully functional automatic feed control system designed to maximize production by analyzing machine performance inputs from multiple sources

 

COMPACT PIN PULLER

  • Included as standard

BRAVO 6280 Specification Sheet (PDF)

OPTIONAL EQUIPMENT

MACHINE MOUNTED FUEL TANK

  • 300 gallon (1,136 L) fuel tank replaces standard 150 gallon for added on board fuel capacity

Mobile Downstream Separation Systems

MOBILE FERROUS AND NON-FERROUS SEPARATION

  • Single Drum Permanent Magnet: 48” (1200 mm) diameter X 48” (1200 mm) long
  • Picking Station: 4 man
  • CAT XQ 125KW Generator Set
  • Allen Bradley Controls that interface with Bravo and Mobile ECS
  • Two (2) 20’ (6.1 m) ferrous and non-ferrous conveyors included as part of assembly
  • All mounted on a track chassis

MOBILE NON-FERROUS ECS SEPARATION SYSTEM

  • Single Eddy Current design: 60” (1500 mm) wide
  • Drum Magnet: 60” (1500 mm) long
  • CAT XQ 60 KVA Generator Set
  • Allen Bradley Controls that interface with Bravo and Mobile Ferrous and Non-ferrous Separator
  • Designed and sized to align with Mobile Fe/NonFe Separator
  • One ECS Negative Conveyor included as part of the assembly
  • All mounted on a track chassis

CALL US

3TEK HEADQUARTERS

201 E Shady Grove Rd.
Grand Prairie, TX 75050

View All Offices

 

SUBSCRIBE TO OUR NEWSLETTER

Subscribe to stay informed about our products, services and new advancements.